charging stage meaning in Chinese
充电阶段
加料台
进气阶段
进气行程
装料站区
Examples
- The battery status detector , which is designed for constantly monitoring the voltage and current in battery to confirm the charging stage , is also discussed in the thesis
芯片中有电池状态检测电路,不间断的检测锂电池的电压和电流,以确定锂电池应该进行的充电阶段。 - The li - ion or li - polymer battery ic use cc / cv charging mode which includes the 3 charging stages : the trickle charging , large constant current charging and constant voltage charging
本文设计的锂电池充电器芯片采用了恒流恒压的充电方法,并在此基础上将充电过程分为三个阶段:预充电、恒流充电和恒压充电。 - Many experiments on the effects with the change of several parameters , such as initial charging current , amplitude and frequency of positive pulses , variety of the amplitude of positive pulses among each charging stages , amplitude and duration of negative pulses , duration between positive and negative pulses , have been performed . the results of analysis and comparison of experimental data verify the validity and feasibility of the fast - charging method . on this basis , a new type of control strategy is advanced
就充电过程中的起始充电电流、正脉冲的幅值、正脉冲的频率、各充电级之间正脉冲幅值的变化幅度、负脉冲的幅值、负脉冲的持续时间、正负脉冲之间的停歇时间等几个参数进行了大量的实验,对实验数据进行分析和比较,验证了快速充电方法的有效性和可行性,在此基础上提出了一种新型快速充电控制策略。 - After which , the battery will be charged by large constant current to allow the fast charging . finally , the constant voltage charging is adopted to guarantee the battery was charged to its full capacity . under the condition that the temperature has raised to a certain threshold at the constant current charging stage , the over temperature circuit is performing and it provides a compensation current which switches the system to constant temperature charging mode with the intention of protecting the ic
即在充电初期采用较小的电流对电池进行预处理,对出现过放电的电池进行修复和保护;然后采用较大的恒定电流对电池充电,实现快速充电的目的;最后采用恒定压充电,确保电池充满;在恒流充电阶段,当芯片温度上升到一定程度时,芯片过热保护电路开始工作,该电路以提供充电补偿电流的形式使充电进入恒温充电模式,对芯片进行保护。